T AND D MACHINE
Mopar Gen III 6.1L Hemi Shaft Rocker Arm Kit
(No reviews yet)
Write a Review
- SKU:
- TDM8360-165/160
- Width:
- 11.30 (in)
- Height:
- 6.50 (in)
- Depth:
- 20.50 (in)
Related Products
Rocker Arm Stud Kit Mopar Gen III Hemi
COMP CAMS
$122.95
Rocker Arm Stud - 8 x 1.25 mm Base Thread - 8 x 1.25 mm Top Thread - 1.750 in Effective Stud Length - Nuts Included - Steel - Black Oxide - Mopar Gen III Hemi - Set of 20
COM4589-KIT
Nitrous Plate - Mopar 5.7L/6.1L Gen III Hemi
NITROUS OXIDE SYSTEMS
$278.95
Nitrous Oxide Plate - GEN III HEMI - 75-250 HP - Hardware / O-Ring - Aluminum - Black Anodized - Mopar Gen III Hemi - Kit
NOS15184
Mopar Gen III Hemi SFI Flexplate 5.7L/6.1L
PRW INDUSTRIES, INC.
$116.84
Flexplate - Xtreme Duty Platinum - 131 Tooth - SFI 29.1 - Steel - Internal Balance - Mopar Gen III Hemi - Each
PQX1837010
Main Bearing Set Mopar 5.7L/6.1L Gen III Hemi
KING BEARINGS
$145.92
Main Bearing - XP - Standard - Extra Oil Clearance - Coated - Mopar Gen III Hemi - Kit
KEBMB5840XPCSTDX
Main Bearing Set Mopar 5.7L/6.1L Gen III Hemi
KING BEARINGS
$138.98
Main Bearing - XP - Standard - Mopar Gen III Hemi - Kit
KEBMB5840XPC
Hi-Tech Pushrods Set Mopar 6.1L Gen III Hemi
COMP CAMS
$224.95
Pushrod - Hi-Tech - 6.700 / 7.900 in Long - 5/16 in Diameter - 0.080 in Thick Wall - Chromoly - Mopar Gen III Hemi - Set of 16
COM8722-16
Mopar 6.1L Gen III Hemi Iron Block 9.250 x 3.927
DART
$5,499.99
Engine - Bare Block - 3.927 in Bore - 9.250 Deck - 4-Bolt Mains - 1-Piece Seal - Iron - 6.1L - Gen III Hemi - Each
DRT31612111
Mopar 6.1L Gen III Hemi Iron Block 9.250 x 4.250
DART
$5,499.99
Engine - Bare Block - 4.250 in Bore - 9.250 Deck - 4-Bolt Mains - 1-Piece Seal - Iron - 6.1L - Gen III Hemi - Each
DRT31612311
Mopar 6.1L Gen III Hemi Iron Block 9.250 x 4.090
DART
$5,499.99
Engine - Bare Block - 4.090 in Bore - 9.250 Deck - 4-Bolt Mains - 1-Piece Seal - Iron - 6.1L - Gen III Hemi - Each
DRT31612211